You can connect fittings to your EZ Flush Replacement RV Sewer Hose # D04-0049 by slipping them into the hose and then using a hose clamp, which you can pick up at your local hardware store, to secure them to the hose or you can use the EZ Coupler RV Sewer Fitting Kit w/ 4-in-1 Adapter # F02-3303, which is designed to thread into the hose for fast and simple use. The bayonet fitting can connect to the lug fitting on your Airstream and the elbow can easily connect to the drop in dump fitting... view full answer...
The EZ Coupler Self-Threading RV Sewer Hose Adapter w/ 3" Bayonet Fitting - Red # F023101 will fit with your sewer hose. You will not need to use the black sleeve you referenced at all. That is intended for a pinched style hose connection versus the screw on style that is far more common. view full answer...
Yes, you can extend any standard 3-inch RV sewer hose as long as the parts use the same fittings. The Camco RhinoEXTREME RV Sewer Hose # CAM39861 uses the popular bayonet type fittings so multiple hoses can be joined.
For reasons of convenience you might prefer to not use three shorter hoses and instead use two longer hoses that together will give you the same overall length you need. If you can avoid the extra connection points you may have fewer concerns with leaks.
All sewer drain... view full answer...
Yes, you can use an extension, like the RhinoFLEX RV Sewer Hose Extension # CAM39765, with the RhinoFLEX RV Sewer Hose Kit # CAM39768.
As long as your extension is the standard 3" diameter hose and has one end with a bayonet fitting and one end with the lug fitting you are good to go!
I have attached some review videos for you to check out as well. view full answer...
Yes, the elbow can be removed from the Dominator RV Sewer Hose Kit # D04-0275. If you look closely at the elbow you will see it has bayonet fittings and fits onto the end of the hose which has the mating lug fittings. view full answer...
Yes, you can store the SilverBack RV Sewer Hose Kit w/ Swivel Fittings part # D04-0650 in a standard 4" x 4" bumper. However, you will need to remove the 90 degree elbow fitting most likely and store it somewhere else in order to do so. Please note we also offer extensions for this sewer hose as well, part # D04-0602 for 2' long or part # D04-0605 for 5' long. view full answer...
The Valterra RV Sewer Hose Carrier # A04-5094BK that you referenced does not have pre-drilled holes for the sewer hose to air out, but you certainly can drill some if that is what you are needing.
As you can see from the product photos and attached video, the carrier is a straight piece of pipe so a 90 degree elbow will need to be removed prior to storing your sewer hose. This is the case for all of our carriers.
If you don't already have a flush valve then I highly recommend using one... view full answer...
You are correct, the Prest-O-Fit RV Sewer Hose # PR53FR does just push on for installation. They use a friction fit to stay connected.
Removing the Prest-O-Fit RV Sewer Hose # PR53FR is not overly difficult. If you use a slight twisting motion while you pull the hose off, it helps to break the friction and remove the hose.
I have included a review video, in the video you can see them put on and remove the hose. It does not appear that they are having to use a lot of force for removal... view full answer...
The RhinoFLEX RV Sewer Hose, part # CAM39768, can be locked by twisting on the orange "base" part right where the fitting meets the black hose. When you physically see the hose it's clearly labled which way to turn to lock and unlock the hose.
I've linked a video that explains the process a little better since you can see it pointed out. view full answer...
Yes, the Waste Master RV Sewer Hose w/ Camlock Fittings, Nozzle, and Endcap - 20' Long # LC359724 can be stored in your bumper without worry of the heat causing it to go bad.
The only thing you need to have is the right amount of space to store the hose, which has a compressed length of 5 feet. view full answer...
Yes, the camlock that is included in the # LC359724 will glue to your current sewer outlet with a few simple steps.
First, remove the cap from your existing fitting. Use a hacksaw to cut off the exterior bayonet tabs and then smooth the surface with sandpaper. Next, glue the camlock fitting onto your RVs outlet using ABS glue # A05-0303.
I have linked the Lippert Components Waster Master RV Sewer Hose to this page for your convenience. view full answer...
The Sidewinder RV Sewer Hose Support System, part # CAM43031, is not a Squatty Potty, or anything like it. It's a system that you insert your RV sewer hose into so that the hose is off the ground and always at an incline. One end of the Sidewinder is 9-3/4 inches tall and the other is 6-3/4 inches tall. So its purpose is to keep the sewer line from getting clogged by forcing everything to flow downhill. view full answer...
There is a solution for you to create a support system when emptying your RV's black water tank using the RhinoEXTREME RV Sewer Hose # CAM39861. To reduce the gross factor you can use the Sidewinder RV Sewer Hose Support System # CAM43041 which will elevate the hose off the ground and can be anywhere from 1 to 15 feet long depending on what you need. I've added links to video reviews for you to take a look at as well. view full answer...
I think I'm following you. It sounds like your portable tote tank has a threaded fitting, but your sewer hose has a bayonet fitting like a typical sewer hose. If that is the case, then I have a solution for you, but we don't have a single adapter.
Instead, you will want to use fitting # T1029-2 and fitting # 344633703 to make the adapter you need. The non-threaded end of part # 344633703, will fit into the end opposite of the 3 bayonet lugs on part # T1029-2. You will want to use ABS... view full answer...
The RhinoFLEX Rhino Blaster Pro Adapter for Rinsing RV Holding Tanks and Sewer Hoses # CAM39085 is an easy way to clean out your tank and hoses. It does not attach with glue but rather with the bayonet style fittings for easy connection and removal. It is a tool-free installation.
The clear tube allows you to not only attach a hose to allow you to flush an enclosed hose, but also lets you see when the water is actually clean so you don't have a half rinsed tank or sewer hose. view full answer...
Yes you can! The 15' long hose that comes with the Dominator RV Sewer Hose Kit # D04-0250 has the bayonet fitting on one end and the lug fitting on the other end. These interlock with each other so you can link 2 of them together.
You may also be interested in a support system like the Camco Sidewinder # CAM43061 which is 30' long. view full answer...
The RhinoFLEX RV Sewer Hose Extension with Swivel Lug and Bayonet Fittings # CAM39765 and similar items do have removable orange fittings but there are not replacement parts available. If you have the fittings then you just need the hose #CAM39671. If you misplace the you will need to replace the entire hose with # CAM39765.
The orange fittings are held in place on the hose itself by a black locking ring. This is the component that is between the orange adapter and the hose proper, as... view full answer...
The two orange fittings at the ends of the RhinoFLEX RV Sewer Hose, part # CAM39761, are designed to come of easily.
The ends can be removed by twisting the black locking rings until loose. From there, you can unscrew the orange fittings. This makes replacing the ends much simpler.
I've linked to a video review of this hose for you to look at. view full answer...
No you aren't missing anything; if the 34" to 60" Valterra RV Sewer Hose Carrier # A04-3460 doesn't have the proper length for your RV, then you will need to go with the longer option. There isn't an 8 foot carrier, but there is one that is close, the adjustable 50" to 94" Valterra RV Sewer Hose Carrier # A04-5094.
I have added links below to a pair of video reviews for you to check out as well if you'd like to take a look. view full answer...
Go To Results